4-sides Hir2 9012 Led Headlight Bulbs

Specifications:
1.Plug Type: 9012, Single Beam

2.LED type: CREE COB LEDs

3.Power: 2400W/set(1200W/bulb)

4.Luminous Flux: 360000LM/set(180000LM/bulb)

5.Voltage: DC 9-32V ( Fit 12V,24V Vehicle )

6.Color Temperature: 6000K-6500K White

7.Beam Angle: 360°

8.Operating Temperature: -40 - +80°C

9.Operating Life: >50000hrs

11.Number of Bulbs: 2

12.To Fit: High + Low Beam Head Lights KIt

13.Placement on Vehicle: Left,Right,Front

14.Material: Aviation 6063 Aluminum Profile

15.Application: Headlight,Fog light (High + Low Beam Head Lights )

Features:

1.100% New and Never Used

2. Super bright Bridgelux COB chip(USA),360 degree clear beam no blind zone

3. IP Rate: IP68

4.Built-in Cooling Fans & Ballasts , Smart Efficient Cooling System Fast Heat Dissipation，No Other Fans & Ballasts Required

5. Built-in constant current CPU,instant full brightness without start-up relay

6.High quality Aluminum heat dissipation ensures the secure temperature range

9.Low Power Consumption than Halogen bulb, Energy Saving

10.Low Voltage Protection, High Precision Constant Current driver Chip

11.Shakeproof and Long lasting up to 50,000 Hours.

12. Heat Dissipation Theory: Heat Pipe Technology + A380 Aluminum Heatsink

13. All-in-one heat conduction+high speed mute fan system keep the light bulb in appropriate working temperature

14. Easy installation

LED headlight advantages:

1. LED lamps are more energy and power than conventional halogen lamps.

The brightness is close to the xenon lamp, but the LED lights are illuminated without delay to enhance road safety.

Instantly start without strong current impact, improve battery life by more than 30%.

2. Fast cooling , using the most advanced, heat-dissipating structural design.

Low warranty:

The power driver adopts a wide voltage constant current mode which has a simple structure, so that the automobile can flexibly cope with various voltage unstable conditions, and has achieved the purpose of less component damage. Compared to HID ballast maintenance, The repair probability is very low which is less than 80%.

3. Low heating temperature, The working temperature of helium can reach 800°-1000°

4. LED headlight has a simple structure, and the parts are less than the xenon lamp, which is lower than the xenon lamp failure rate!

5. Car LED headlight color temperature are balancing. Xenon bulbs are clear in the same color, about 6000K.

Package Content:

2x 9012 High Power LED HeadLights Bulbs

Comes with Retail Box

★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
IMPORTANT:
eBay compatible list can not show up all car model, and sometimes it may have mistake. Please check the manul of your vechicle and choose the correct bulb socket. If you are not sure the which socket your vehicle need, Please send us your car make, model, year and other information, we will help to check which bulbs you need, thank you.
 
FREQUENTLY ASKED QUESTIONS OF LED
 
1.Both side could not work?
please turn around the plug (swap the polarity) and try again
 
2.One side could not work?
1)please turn around the plug (swap the polarity) of the defective bulb and try again
2)please exchange the bulbs from side to side and see if the problem could solve
3)Please check your connection and fuse
4)If still could not help, please contact our customer service, we will get back to you within 24 working hours
 
3.Both side flicker/interference/error light?
Pls kindly noted that your car need a resistor Cancelers Decoders, you can contact our customer service for help
 
4.My bulb type is H7, but the one you sent could not fit?
Pls kindly noted that your car need a bulb holder to lock the bulb, you can get one from ebay according to you vehicle model
 
5.My bulb type is H1, but there is only one clip on my bulb and the one you sent has two clip
Pls kindly noted that different cars have different connection way, which some have both positive and negative electrode, while some just have positive electrode but not negative. if there is just positive electrode but not negative, please connect the positive side, as for the negative wire, please connect to the car's metal shell.
 
6.The bulbs is loss and it could not fit(H8/H9/H11/9005)
Please put the bulb in the bulb assembly, and make sure to rotate the bulbs in the socket by clockwise, only by this way can install the bulbs, if you just put it in the socket, cannot stable the bulbs.
 
7.The bottom of the bulb is too big and it could not fit
For some special cars, you need to make a hole on the waterproof/dust cover and let the fans come out, and in this way will solve the radiating problem.
 
If the problem you meet is not on above or the answers cannot solve the problem, please feel free to contact us through eBay message, we will try our best to help you solve the problem and definitely won't let your interests to be damaged. So anything please keep in touch first, I believe that everything could be solved by communication.